ThaiMTB.com

Rindow LED Bullet Light ไฟจักรยานงาน CNC ชาร์ต USB สามารถเลือกที่ติดได้หลายตำแหน่ง
Aluminum out cutting by (CNC) is Villette-type body and LED Rechargeable Light.Simple and smallish figure does not do the extra claims. In addition to mount bicycle is not chosen. Minibero from the load, folding bike, it might be interesting even Forget attached to infant car!　When you install an basket, or not there, such as when you are in trouble in the mounting position of the great light of the bullet-shaped?　When I handle position, appearance of the handle portion feel heavy.Front basket does not illuminate before a hindrance. If you are attached to the front of the basket, the stay was broken under the weight of light. Or, it would hang downward. Space under the basket can not be mounted by narrow. Etc., etc.

　This is what I also tasted the same feeling. It is the possible attached to such a narrow space. Bullet Lighting might miss it becomes Chikamo and if installation of the only, but does not interfere with the attachment, will illuminate the firmly forward without interfering with the design of the bicycle. It is a smallish light in consideration of the total design. อุปกรณ์เสริม

LIGHTING stay

Bent type

304 stainless steel 70mm

with SUS M6 Bolt Nut accessories

Straight

304 stainless steel 70mm

with SUS M6 Bolt Nut accessories
RINDOW BULLET LIGHT CNC MOUNT
Remove the strap portion, by attaching to the original light, it can be screwed to the dowel of the frame or the like. Also it wants to facilitate a combination of a commercial of the stay. (Mounting example) Please refer to the image below. Click to enlarge.