TECHNICAL DATA
USE : MTB - LEISURE TO COMPETITION
BODY : POLYAMIDE WITH FIBERGLASS FIBERS INJECTED
AXLE : STEEL
THREADS : 9/16 X 20 MM
BEARINGS : 1 CARTRIDGE BEARING, 1 NEEDLE BEARING
SEALS : 1 LIP SEAL + 1 BEARING SEAL
HEIGHT : AXLE / SOLE 12,5 MM (CLEAT SUPPORT)
DISTANCE : PEDAL AXLE / CRANKARM 53 MM
MULTITENSOR : NO
CLEATS : QUARTZ
ANGULAR PLAY : ± 3°
LATERAL PLAY : ± 1,5MM
PEDAL PLAY : 140 G (318 G PER PAIR WITH CLEATS AND MOUNTING BOLTS)
COLORS : BODY GREY AND BLACK
ACCESSORIES : SOLD WITH 1 Pr. OF 15° CLEATS, 1 Pr. OF 20° CLEATS, ASSORTED FITTING SPACERS
ACCESSORIES : 4 BOLTS
WARRANTY : 2 YEARS
• 2009 EVOLUTION – ENTRY / RELEASE
The new QUARTZ MTB pedals are equipped with an all new retention spring that allows firmer cleat entry-release.
The technical concept is the same proven system as the 2008 pedals but the retention spring material has been improved.
It's lightweight, simple and an excellent performer.
Quartz MTB pedals are known to be one of the best pedals on the market for cleat support, mud evacuation, lightness, and longevity.
The new QUARTZ MTB pedal delivers better cleat engagement and support in the most demanding marathon and CX conditions.
• MUD EVACUATION
The simplicity and design of this pedal with its open area between the pedal body and retention spring allows excellent mud evacuation in the worst climatic conditions.
• LARGE SUPPORT AREA
The large support area between the shoe cleats and the platform on the shoe make the QUARTZ a stable and efficient performer.
Adjusting washers of .5mm, 1mm and 2mm are delivered with the pedals to assure optimum contact with different shoe models.
• WEIGHT: 140 G
Slightly heavier than the QUARTZ Carbon, the QUARTZ attains a very respectable weight for a product under 60 euros. It's close to the lightest pedal on the market in this price range.
• POLYAMIDE BODY
Polyamide body with fiberglass embedded into the body lessens weight compared and is more resistant to wear than an aluminum bodied pedal.
• AXLE SYSTEM 2 BEARINGS / STEEL AXLE
• The QUARTZ Carbon is equipped with a light oversized steel axle. 2 micro cartridge bearings and one needle cartridge bearing.
• Reinforced seals protect the bearings in extreme use. The cartridge bearings have seals on the exterior of the cartridge.
•TI axles save weight without compromising strength. Look axles are approved after a rotational test of a million eccentric (which creates a shock during each revolution) cycles at 100 rpm with 90kg loaded on the center of the axle. This is well beyond the required EN14781 test of 100,000 cycles at a 65kg load.
Suggested retail price : 2,440 baht
http://www.velothai.com
tel : 02-388-0199
.