Please allow 10-15 business days for wheels to be shipped.
The ZTR Race Gold 29er wheelset changed the way people look at 29ers. Now get the wheelset that sets the Gold Standard. The new Race Gold 29er wheelset uses the same rim technology as the Race 7000 wheelset that propelled Sabine Spitz to 2008 Olympic Gold.
The improved rim design provides a wider tire base for more stability and traction, a lower sidewall for increased usable air volume, and lighter weight. Stan's New 3.30 Ti hubs with stainless bearings increase reliability and provide quicker engagement to maximize pedaling efficiency. Front 3.30 Ti hubs can be converted to 15mm or 9mm thru with and adittional kit. Rear 3.30 Ti hubs can be converted to 12 x142 or 10 x 135 with an additional kit.
No longer be held back by heavier wheels. With 320 gram rims and Stan’s 3.30 Ti hubs laced to maximize lateral stiffness and rim longevity, the Race Gold 29er wheelset is the unquestioned leader of the lightweight racing category.
Includes: 15mm end caps
ZTR Race Gold 29er Total Weight 1390 grams Max recommended rider weight 170lbs Rims ZTR Race Gold 29er 2013 Rim Material 6061 Alloy Rim Depth 15.6mm Rim Width External 24.2mm Rim Width Internal 21.3mm Front Hub 6 bolt Stan's 3.30 Ti or Cannondale Lefty Rear Hub 6 bolt Stan's 3.30Ti, 3.30SS or 12x142 XD Hub Bearings Stainless Cartridge Spokes 1.8/1.5 DT Revolution Black Spoke Nipples Red Alloy Front Spoke Lacing 32H, 2 Cross Rear Spoke Lacing 32H, 3 Cross ND Side, 2 Cross D Side Spoke Length Front (L/R) 283mm/288mm Spoke Length Rear (L/R) 294mm/283mm Valve Stem Red Aluminum
Featuring BSTTM (Bead Socket Technology)
Includes 2 Stan's Carbon Levered Skewers weighing only 76 grams
Shimano and SRAM 8/9/10 speed compatible
Stan's 3.30 Ti Front Hub QR & 15mm end caps included, 9mm thru compatible with this kit
Stan's 3.30 SS Single QR Speed Hub
Stan's 3.30 Ti Rear Hub , This is 12x142 Compatible with this kit, 10 x 135 thru compatible with this kit
Yellow tape and valves installed
Additional information
The ZTR Race Gold 29er is a low pressure rim and it must be run at pressures of 15-33 psi. Higher pressures may cause damage to the rim and will not be covered in the warranty. If you prefer to run high pressures, please consider purchasing a different rim from the ZTR product line.
Designed to work with standard tube-type tires using just the yellow tape and valves for tubeless without burping.
The ZTR Race Gold 29er rim is designed such that standard tires will inflate easily on this rim when setup tubeless. Some tires will mount with a little more difficulty but keep the beads centered in the rim cavity and refer to this video for further detail.
UST and Tubeless Ready tires may be difficult to mount on this rim.
Can be used with tubes
Podium MMX, Race 29er and Race Gold 29er Warranty/Crash Replacement
Formerly called Medalist
The Podium 27.5 uses the proven rim desing from our Podium and Race Gold rims for optimal stability and traction, a low sidewall for increased usable air volume, and extremely light. Stan's 3.30 Ti hubs with stainless bearings increase reliability and provide quicker engagement to maximize pedaling efficiency. Front 3.30 Ti hubs comes with QR & 15mm end caps, Rear 3.30 Ti hubs comes as QRx135 can be converted to 12 x142 or 10 x 135 with an additional kit.
Podium 27.5 Total Weight 1335 grams Max recommended rider weight 170lbs Rims ZTR Podium 27.5 BSTTM Disc Rim Material 6061 Alloy Rim Depth 15.6mm Rim Width External 24.2mm Rim Width Internal 21.3mm Front Hub 6 bolt Stan's 3.30 Ti or Cannondale Lefty Rear Hub 6 bolt Stan's 3.30Ti, 3.30SS or 12x142 XD Hub Bearings Stainless Cartridge Spokes 1.8/1.5 DT Revolution Black Spoke Nipples Red Alloy Front Spoke Lacing 32H, 2 Cross Rear Spoke Lacing 32H, 3 Cross ND Side, 2 Cross D Side Spoke Length Front (L/R) 264mm/270mm Spoke Length Rear (L/R) 276mm/264mm
Featuring BSTTM (Bead Socket Technology)
Includes 2 Stan's Carbon Levered Skewers weighing only 76 grams
Shimano and SRAM 8/9/10 speed compatible
Stan's 3.30 Ti Front Hub QR & 15mm end caps included, 9mm thru compatibile with this kit
Stan's 3.30 SS Single QR Speed Hub
Stan's 3.30 Ti Rear Hub, This is 12x142 Compatible with this kit, 10 x 135 thru compatible with this kit
Yellow tape and valves installed
Additional information
The ZTR Podium 27.5 is a low pressure rim and it must be run at pressures of 15-33 psi. Higher pressures may cause damage to the rim and will not be covered in the warranty. If you prefer to run high pressures, please consider purchasing a different rim from the ZTR product line.
Designed to work with standard tube-type tires using just the yellow tape and valves for tubeless without burping.
The ZTR Podium 27.5 rim is designed such that standard tires will inflate easily on this rim when setup tubeless. Some tires will mount with a little more difficulty but keep the beads centered in the rim cavity and refer to this video for further detail.
UST and Tubeless Ready tires may be difficult to mount on this rim.
Can be used with tubes
Podium MMX, Podium 27.5 and Race Gold 29er Warranty/Crash Replacement
The ZTR Crest is built for cross country and light trail use. Lighter than the Arch EX, it features next generation BST for tire stability, minimal rolling resistance and outstanding tubeless seal. Wins at the Tour Divide and BC Bike Race have established the Crest 29er as the leader in light, reliable big wheels.
ZTR Crest 29 Black Total Weightrl 1585 grams Max recommended rider weight 190lbs Rims Crest 29 Disc Rim Material 6061 Alloy Rim Depth 15.8mm Rim Width External 24.4mm Rim Width Internal 21mm Front Hub 3.30 6-Bolt Disc Front QR / 15mm Rear Hub 3.30 6-Bolt Disc Rear QR or 12x142 or SS Hub Bearings Cartridge Spokes 2.0/1.7 Black Stainless Spoke Nipples DT Silver Alloy Front Spoke Lacing 32H, 3 Cross Rear Spoke Lacing 32H, 3 Cross Spoke Length Front (L/R) 292mm/296mm Spoke Length Rear (L/R) 294mm/292mm
Featuring BSTTM (Bead Socket Technology)
Cassette Options: Shimano/SRAM or SRAM XD
Yellow rim tape and valves installed for tubeless use.
The ZTR Crest is built for cross country and light trail use. Lighter than the Arch EX, it features next generation BST for tire stability, minimal rolling resistance and outstanding tubeless seal.
ZTR Crest 27.5 / 650b Black Total Weight 1520 grams Max recommended rider weight 190lbs Rims 27.5 / 650b Disc Rim Material 6061 Alloy Rim Depth 15.8mm Rim Width External 24.4mm Rim Width Internal 21mm Front Hub 3.30 6-Bolt Disc Front QR/15mm Rear Hub 3.30 6-Bolt Disc Rear QR or 12x142
Hub Bearings Cartridge Spokes 2.0/1.7 Black Stainless Spoke Nipples DT Silver Alloy Front Spoke Lacing 32H, 3 Cross Rear Spoke Lacing 32H, 3 Cross Spoke Length Front (L/R) 272mm/276mm Spoke Length Rear (L/R) 274mm/272mm
Featuring BSTTM (Bead Socket Technology)
Cassette Options: Shimano/SRAM or SRAM XD
Yellow rim tape and valves installed for tubeless use.
The successor to the legendary 355 650b, the ZTR Crest 27.5 / 650b rim leads the way in stiffness-to-weight ratio thanks to the innovative internal arch design. Wider inside cavity lends more stability to tires run at low pressures as well as the perfect compliment to larger volume tires.
Fully tubeless compatible with the 25mm yellow tape and valve stem. Also compatible with tubes.
Size 650b x 24.4mm
Color Black
Hole # 32
Brakes Disc
Weight 365g
ISO 584 x 21
ERD 565
Tape Width 25mm
The result of blending a ZTR Race rim with a ZTR 355, the ZTR Crest is the best of both worlds. All the wall thickness and corresponding durability of a 355 with the next generation BST creating a wider rim cavity with shorter sidewalls.
Fully tubeless compatible with the 21mm yellow tape or the 25mm yellow tape and valve stem.
Size 29" x 24.4mm
Color Black
Hole # 32
Brakes Disc
Weight 380g
ISO 622 x 21
ERD 605
Tape Width 21 or 25mm
The Arch EX is lighter, wider and tougher than the original Arch rim! Once again, Bead Socket Technology construction provides superior tubeless compatibility. The internal arch design provides durability and stiffness, two assets especially important for heavier riders. Although lightweight, the Arch EX can handle aggresive trail riding. Quite possibly the best rim for any situation. Inspire confidence in your ride with the ZTR Arch EX.
Fully tubeless compatible with the 25mm yellow tape and valve stem.
Size 650b" x 24.6mm
Color Black
Hole # 32
Brakes Disc
Weight 420g
ISO 584 x 21
ERD 566
Tape Width 25mm
New for 2012 we've taken one of our best selling rims and made it even better. The new Arch EX is lighter, wider and tougher than the original Arch rim! Once again, Bead Socket Technology construction provides superior tubeless compatibility. The internal arch design provides durability and stiffness, two assets especially important for heavier riders. Although lightweight, the Arch EX can handle aggresive trail riding. Quite possibly the best rim for any situation. Inspire confidence in your ride with the ZTR Arch EX.
Fully tubeless compatible with the 25mm yellow tape and valve stem.
Size 29" x 24.6mm
Color Black
Hole # 32
Brakes Disc
Weight 460g
ISO 622 x 21
ERD 606
Tape Width 25mm
With multiple World Cup and World Championship victories already in the books, improving the legendary Flow wasn't easy, but input from the best riders in the world and countless hours spent sweating even the smallest of details has led to a rim that redefines what even we thought was possible. The new Flow EX is lower, wider, and meaner, offering a lower profile sidewall and redesigned Bead Socket Technology for maximum durability and tire seal on even the most punishing of technical trails. We kept the weight low, but the new EX offers 14% thicker sidewalls for maximum dent resistance and a 33% thicker spoke bed for added pull-through strength. Increasing the outside width of the rim to 29.1mm and the interior width to 25.5mm let us reshape the bead socket for an even tighter seal and allowed our internal arch to add even more stiffness to the rim's structure. The new Flow EX: the strongest, fastest rolling, and best sealing tubeless rim available for 26-inch, 29-inch and 650b tires sizes just got even better.
Fully tubeless compatible with the 25mm yellow tape and valve stem.
Size 650B x 29.1mm
Color Black
Hole # 32
Brakes Disc
Weight 510g
ISO 584 x 25.1
ERD 562
Tape Width 25mm
With multiple World Cup and World Championship victories already in the books, improving the legendary Flow wasn't easy, but input from the best riders in the world and countless hours spent sweating even the smallest of details has led to a rim that redefines what even we thought was possible. The new Flow EX is lower, wider, and meaner, offering a lower profile sidewall and redesigned Bead Socket Technology for maximum durability and tire seal on even the most punishing of technical trails. We kept the weight low, but the new EX offers 14% thicker sidewalls for maximum dent resistance and a 33% thicker spoke bed for added pull-through strength. Increasing the outside width of the rim to 29.1mm and the interior width to 25.5mm let us reshape the bead socket for an even tighter seal and allowed our internal arch to add even more stiffness to the rim's structure. The new Flow EX: the strongest, fastest rolling, and best sealing tubeless rim available for 26-inch, 29-inch and 650b tires sizes just got even better.
Fully tubeless compatible with the 25mm yellow tape and valve stem.
Size 29" x 29.1mm
Color Black
Hole # 36
Brakes Disc
Weight 545g
ISO 622 x 25.5
ERD 601
Tape Width 25mm
